October 21, 2022
We would like to thank you for your continued patronage.
Regarding the TOSNUC-800 and TOSNUC-777.2 series NC controllers that have been used for many years, we have informed you that the production of the servo motors used in these controllers has been discontinued due to the long period of time that has passed since the design and production began. but this occasion we have also been informed by the manufacturer that the production of the encoder (TS5781N13) will be discontinued.
Although we have making every effort to secure the encoders, we have no choice but to terminate the service support for the related parts by the end of December 2025, which is the estimated end of the production period based on the available production volume.
Therefore, we sincerely apologize for the inconvenience, but we would like to ask for your understanding and forgiveness as we will take the following measures from now on.
Yours sincerely
For details on this matter, please check the PDF below and if you have any questions, please contact us using the inquiry form below.
January 29, 2024
Dear Sir or Madam, We would like to thank you for your continued patronage and using our NC system “TOSNUC” series for many years.
We would like to inform you that the manufacturer has announced the discontinuation of the IC chips that make up the core printed circuit boards of the TOSNUC-600, 777, 777.2, 800, and 888 series.
Although we have made every effort to secure parts and materials, we have no choice but to terminate our service support for the related parts due to the production volume of this IC chip.
We would appreciate your understanding in this situation in our future actions as follows.
Sincerely yours
For details on this matter, please check the PDF below and if you have any questions, please contact us using the inquiry form below.
We promptly supply service parts of various machines.
The spindle taper hole deteriorates due to long-term use and accidental crashes.
Our spindle taper hole grinder and expert’s technique can renew a spindle taper hole.
We can make a complex mechanism of reduction gears into a slim and simple mechanism.
That makes a quiet environment with few machine noise.
A small lightweight grip can control operation; heavy handle operation is no longer necessary.
Because spindle drive system of the machining center has been updated, repair time and parts are no longer concerns.
We are pleased to help update to the new control device.
Old oil cooler could be an error cause.
An environment friendly cooler is good for ecology.Let us take a look at your cooler first.
Off course, the chain for supporting a heavy spindle head has a lifespan.
Inspecting it in detail is necessary.
Failing to replacing the NC battery may cost a lot of time and money for recovery.
Install the battery box for operation safety and security!
We provide guidance on NC programming and machine operation.
For inquiries regarding our products, please contact us here.
Copyright © 2020 SHIBAURA MACHINE CO.,LTD, all rights reserved.